[1]余碧君,毛伟. 油井地层压力计算方法研究[J]. 油气井测试,2014,23(6):9-11、73.YU B J,MAO W. Research on formation pressure calculation method in oil well[J]. Well Testing,2014,23(6):9-11,73.
[2]WANG H Z,LIU T C,SUN Z Z,et al. Formation pressure distribution and productivity prediction of fractured horizontal wells in stress sensitive reservoirs[J]. Frontiers in Energy Research,2022,10.
[3]王勇. 油气田地质因素对油气田开发的影响[J]. 化工管理,2023,(23):155-158.WANG Y. The impact of geological factors on the development of oil and gas fields[J]. Chemical Enterprise Management,2023,(23):155-158.
[4]李阳,黄文欢,金勇,等. 双碳愿景下中国石化不同油藏类型CO2驱提高采收率技术发展与应用[J]. 油气藏评价与开发,2021,11(6):793-804、790.LI Y,HUANG W H,JIN Y,et al. Different reservoir types of CO2 flooding in Sinopec EOR technology development and application under“dual carbon”vision[J]. Petroleum Reservoir Evaluation and Development,2021,11 (6):793-804,790.
[5]陈立. 压驱注水技术在复杂断块油藏中的应用[J]. 内江科技,2022,43(12):14-16.CHEN LI. The application of pressure-driven water injection technology in complex fault block reservoirs[J]. Neijiang Science & Technology,2022,43(12):14-16.
[6]闫飚,范洪富,伍国栋. 低矿化度水驱提高原油采收率研究进展[J]. 油田化学,2022,39(3):554-563.YAN B,FAN H F,WU G D. Research progress of low salinity water flooding for EOR[J]. Oilfield Chemistry,2022,39(3):554-563.
[7]刘合,曹刚. 新时期采油采气工程科技创新发展的挑战与机遇[J]. 石油钻采工艺,2022,44(5):529-539.LIU H,CAO G. Opportunities and challenges for scientific and technological innovation and development of oil and gas production engineering in the new era[J]. Oil Drilling & Production Technology,2022,44(5):529-539.
[8]弋忠. 低渗透油田注水开发工艺技术分析[J]. 中国石油和化工标准与质量,2023,43(16):166-168.YI Z. Analysis of water injection development technology for low permeability oilfield[J]. China Petroleum and Chemical Standard and Quality,2023,43(16):166-168.
[9]朱争,党海龙,崔鹏兴,等. 低渗透油藏蓄能增渗压力规律数值模拟[J]. 新疆石油天然气,2023,19 (4):56-62.ZHU Z,DANG H L,CUI P X,et al. Numerical simulation of the pressure law of energy charging and permeability enhancement in low-permeability reservoirs[J]. Xinjiang Oil & Gas,2023,19(4):56-62.
[10]辛金波,杨鎔,钟文瑞. 特低渗透油田注水开发技术研究[J]. 石化技术,2023,30(5):223-225.XIN J B,YANG R,ZHONG W R. Research on water injection development technology for ultra low permeability oilfield[J]. Petrochemical Industry Technology,2023,30(5):223-225.
[11]何善斌,顾九骊,阳波,等. 华庆油田X区油藏工程方法研究[J]. 中国石油和化工标准与质量,2022,42(23):121-123.HE S B,GU J L,YANG B,et al. Research on reservoir engineering methods in Zone X of Huaqing Oilfield[J]. China Petroleum and Chemical Standard and Quality,2022,42 (23):121-123.
[12]张金发,管英柱,李亭,等. 致密沉凝灰岩储层特征及储层伤害评价——以三塘湖盆地马56块条湖组为例[J]. 中国科技论文,2022,17(9):1027-1034、1056.ZHANG J F,GUAN Y Z,LI T,et al. Characteristics of tight sedimentary tuff reservoirs and evaluation of reservoir damage:A case study of the Tiaohu Formation in Block Ma56 of the Santanghu Basin[J]. China Sciencepaper,2022,17(9):1027-1034,1056.
[13]康博韬,皮建,李长勇. 厚层孔隙型碳酸盐岩油藏注采优化研究[J]. 石油化工应用,2020,39(9):60-66.KANG B T,PI J,LI C Y. The optimization of injection-production for pore-type carbonate reservoir with giant thickness[J]. Petrochemical Industry Application,2020,39(9):60-66.
[14]蔡萌. 大庆油田采油工程主体技术现状及展望[J]. 石油钻采工艺,2022,44(5):546-555.CAI M. Current situation and prospect of main technology of oil production engineering in Daqing Oilfield[J]. Oil Drilling & Production Technology,2022,44(5):546-555.
[15]谢晶,罗沛,杨云,等. 东坪基岩气藏压力恢复试井曲线特征识别及解释研究[J]. 非常规油气,2020,7(3):90-95.XIE J,LUO P,YANG Y,et al. Identification and interpretation of pressure buildup well testing curve characteristics in Dongping bedrock gas reservoirs[J]. Unconventional Oil & Gas,2020,7(3):90-95.
[16]徐剑明. 普光气田气井压力恢复试井优化与应用[D]. 四川成都:西南石油大学,2018.XU J M. Optimization and application of pressure buildup well testing in Puguang Gas Field[D]. Chengdu,Sichuan:Southwest Petroleum University,2018.
[17]甘笑非,易劲,欧家强,等. 基于井间干扰模型的气井压力恢复数值试井技术[J]. 油气井测试,2022,31 (3):9-15.GAN X F,YI J,OU J Q,et al. Numerical pressure buildup well testing technology for gas wells based on inter-well interference model[J]. Well Testing,2022,31(3):9-15.
[18]尹鹏,张志军,阮洪江,等. 一种新的注采比与含水率关系式的研究与应用[J]. 当代化工研究,2023,(14):105-107.YIN P,ZHANG Z J,RUAN H J,et al. Research and application of a new relationship between injection production ratio and water content[J]. Modern Chemical Research,2023,(14):105-107.
[19]张顺康,刘炳官,尤启东,等. C3断块K_2t_1~3注水外溢及合理注采比[J]. 科学技术与工程,2021,21 (34):14548-14553.ZHANG S K,LIU B G,YOU Q D,et al. Study on K_2t_1-3 injection outflow and reasonable injection production ratio in C3 fault block[J]. Science Technology and Engineering,2021,21(34):14548-14553.
[20]张宏友. 利用注采平衡法确定水驱油藏合理地层压力[J]. 石油地质与工程,2017,31(6):121-124.ZHANG H Y. Determination of reasonable formation pressure in water-flooding reservoirs using injection-production balance method[J]. Petroleum Geology & Engineering,2017,31(6):121-124.
[21]杨磊,田洋阳,秦苑,等. 基于物质平衡法的注采比预测[J]. 辽宁化工,2013,42(9):1132-1134.YANG L,TIAN Y Y,QIN Y,et al. Prediction of injection production ratio based on material balance method[J]. Liaoning Chemical Industry,2013,42(9):1132-1134.
[22]李凤颖,查玉强,孙胜新,等. 利用物质平衡法分析小层注水量[J]. 海洋石油,2021,41(3):37-41、47.LI F Y,ZHA Y Q,SUN S X,et al. Analysis of water injection in small layers by using material balance method[J]. Offshore Oil,2021,41 (3):37-41,47.
[23]陶永富,许瑞,乔梁,等. 应用物质平衡法评价鸭儿峡M油藏地层压力[J]. 油气井测试,2019,28(1):72-78.TAO Y F,XU R,QIAO L,et al. Evaluation of formation pressure in M reservoir of Yaerxia Oilfield by material balance method[J]. Well Testing,2019,28(1):72-78.
[24]彭磊,罗江伟,赵宏波,等. 长庆油田米绥新区易漏地层漏失机理[J]. 新疆石油天然气,2023,19 (4):10-19.PENG L,LUO J W,ZHAO H B,et al. The lost circulation mechanism in formations prone to lost circulation at Misui Block in Changqing Oilfield[J]. Xinjiang Oil & Gas,2023,19(4):10-19.
[25]刘立虎. 超前注水在特低渗透油田中的应用——以吴起油田为例[J]. 非常规油气,2018,5(1):86-93、79.Liu L H. Application of advanced water injection in ultra-low permeability oil fields:A case study of Wuqi Oilfield[J]. Unconventional Oil & Gas,2018,5(1):86-93,79.
[26]张振杰,苏进昌,李展峰,等. 随钻测压技术在渤海油田开发中的应用[J]. 录井工程,2022,33(1):51-55.ZHANG Z J,SU J C,LI Z F,et al. Application of pressure measurement while drilling in the development of Bohai Oilfield[J]. Mud Logging Engineering,2022,33(1):51-55.
[27]罗宪波,常会江,雷源,等. 注水井优化配注方法应用现状及发展方向[J]. 油气藏评价与开发,2023,13(2):223-232.LUO X B,CHANG H J,LEI YUAN,et al. The application status and development direction of optimized injection allocation methods for water injection wells[J]. Petroleum Reservoir Evaluation and Development,2023,13(2):223-232.
[28]李海龙,刘振旺,张莲忠,等. Logistic旋回模型在油田合理注水量及注采比确定中的应用[J]. 山东东营:中国石油大学胜利学院学报,2015,29(4):30-32.LI H L,LIU Z W,ZHANG L Z,et al. The Application of Logistic cycle model in determining reasonable water injection rate and injection-production ratio in oilfield[J]. Journal of Shengli College,China University of Petroleum,2015,29(4):30-32.
[29]沈思博. 预测模型对美国致密油区块产量预测与适用性分析[J]. 内蒙古石油化工,2022,48(1):44-47.SHEN S B. Prediction of the output in tight oil block in united states with a prediction model and its applicability analysis[J]. Inner Mongolia Petrochemical Industry,2022,48(1):44-47.
[30]余果,方一竹,刘超,等. 改进峰值天然气产量预测模型在四川盆地的应用[J]. 天然气技术与经济,2020,14(2):34-39.YU G,FANG Y Z,LIU C,et al. Application of improved gas peak production prediction model in Sichuan Basin[J]. Natural Gas Technology and Economy,2020,14(2):34-39.
|