新疆石油天然气 ›› 2026, Vol. 22 ›› Issue (3): 67-77.DOI: 10.12388/j.issn.1673-2677.2026.03.007

• 油气开发 • 上一篇    下一篇

深井多参数时滞响应特征对溢流智能识别的影响机制分析

杨继成, 王志远, 孙小辉, 隋秀安, 胡俊杰   

  1. 1.中国石油大学(华东)石油工程学院,山东青岛  266580;

    2.中国石油大学(华东)计算机科学与技术学院,山东青岛  266580;

    3.深层油气全国重点实验室,山东青岛  266580

  • 收稿日期:2026-08-15 修回日期:2026-08-18 接受日期:2026-09-01 出版日期:2026-09-15 发布日期:2026-09-15
  • 通讯作者: 王志远(1981—),2009年毕业于中国石油大学(华东)油气井流体力学与工程专业,博士,教授,现从事油气井多相流动理论及应用等方面的研究工作。(E-mail)wangzy1209@126.com
  • 作者简介:杨继成(2001—),中国石油大学(华东)石油与天然气工程专业在读,博士,现从事井控智能化技术研究工作。(E-mail)jicheng0827@gmail.com
  • 基金资助:

    1.国家自然科学基金项目“超深特深层油气钻采流动调控”(52288101);

    2.国家自然科学基金项目“超深气井生产管柱泄漏精准识别与压力管控”(52434002);

    3.教育部基础学科和交叉学科突破计划“超深层钻井安全提效装备”(JYB2025XDXM301);

    4.泰山学者专项。

Analysis of the Influence Mechanism of Multi-Parameter Time-Lag Response Features on Intelligent Kick Detection in Deep Wells

Yang Jicheng , Wang Zhiyuan,  Sun Xiaohui , Sui Xiuan , Hu Junjie   

  1. 1. School of Petroleum Engineering,China University of Petroleum (East China),Qingdao,Shandong 266580,China;

    2. College of Computer Science and Technology,China University of Petroleum (East China),Qingdao,Shandong 266580,China;

    3. State Key Laboratory of Deep Oil and Gas,China University of Petroleum (East China),Qingdao,Shandong 266580,China

  • Received:2026-08-15 Revised:2026-08-18 Accepted:2026-09-01 Online:2026-09-15 Published:2026-09-15

摘要:

深井井控监测系统通常按统一时间戳记录多项参数,但同步采集并不意味着参数对溢流状态同步响应。受井筒传播、测点位置、信号累积和测量链路影响,不同参数的有效异常信息可能分布在不同历史位置。针对这一问题,基于50组现场工况边界参数反演形成的独立模拟工况,在历史窗口内确定各参数的最佳响应位置并构造历史校正输入,采用相同Transformer时序模型比较四种输入方式。结果表明,综合表现最优的联合输入,其准确率(Accuracy)、精确率(Precision)、召回率(Recall)和F1值分别为0.886、0.922、0.794和0.798;相较同步输入,Accuracy、Precision、Recall和F1分别变化+0.025、+0.059、-0.019和+0.019,其中Precision的正向变化幅度最大。四项配对差异的置信区间均跨越零点,说明当前结果表现为数值改善趋势,尚未达到统计显著。非匹配输入的综合表现较低,表明性能变化主要来自参数与历史响应位置的正确对应。时滞分析能够改善输入特征的时间匹配,可作为智能井控数据质量优化方法。

关键词:

"> 深井井控;溢流识别;响应时滞;工况反演;位置校正;Transformer

Abstract:

Deep-well well-control monitoring systems record multiple parameters using unified timestamps;however,synchronous acquisition does not imply synchronous response to a kick. Owing to wellbore propagation,sensor location,signal accumulation,and measurement-chain effects,effective anomaly information from different parameters may occur at different historical positions. To address this issue,50 independent simulation cases were generated by inverting field operating-condition boundary parameters. The optimal response position of each parameter was identified within a historical window to construct time-corrected inputs. The same Transformer time-series model was then used to compare four input schemes. The combined input achieved the best overall performance,with Accuracy,Precision,Recall,and F1 values of 0.886,0.922,0.794,and 0.798,respectively. Relative to the synchronous input,Accuracy,Precision,Recall,and F1 changed by +0.025,+0.059,-0.019,and +0.019,respectively,with Precision showing the largest positive improvement. The confidence intervals for all four paired differences crossed zero,indicating a numerical improvement trend rather than statistical significance at the current sample scale. The non-matched input performed less favorably overall,demonstrating that the improvement mainly arose from correctly matching each parameter to its historical response position. Time-lag analysis improves the temporal alignment of input features and can serve as a data-quality optimization method for intelligent well control.

Key words:

deep-well well control, kick detection, response time lag, operating-condition inversion, position correction, Transformer

中图分类号: