Journals
  Publication Years
  Keywords
Search within results Open Search
Please wait a minute...
For Selected: Toggle Thumbnails
Research Progress and Prospect of Lost Circulation Materials for Ultra-Deep Drilling
Sun Jinsheng, Ren Zhangkun, Bai Yingrui, Yang Jingbin, Lyu Kaihe, Jin Jiafeng
Xinjiang Oil & Gas    2026, 22 (3): 1-16.   DOI: 10.12388/j.issn.1673-2677.2026.03.001
Abstract (1400)      PDF (13154KB)(33)       Save

In view of technical challenges of lost circulation control during ultra-deep drilling,this research provides a systematic review of lost circulation materials (LCMs) for ultra-deep drilling,covering both international and China’s research progress. It summarizes the advantages and limitations of various types of LCMs,analyzes the core technical challenges under extreme wellbore environments,and outlines future development directions. As oil and gas exploration in China progressively advances toward ultra-deep formations,drilling operations are commonly confronted with complex conditions including high temperature and high pressure,multi-scale fracture-vug development,and dynamic in-situ stress disturbances. Frequent lost circulation,difficulty in thief zone plugging,and short sealing duration have severely constrained the efficient development of ultra-deep hydrocarbon resources. At present,a multi-category technological framework for ultra-deep LCMs has been established,encompassing rigid bridging materials,consolidating materials,micro/nano-plugging agents,smart-responsive materials,and multifunctional composite systems,with notable progress achieved in lost circulation control. However,existing technologies still face critical challenges,such as insufficient long-term stability at ultra-high temperature (>220 ℃),inadequate sealing strength for large-scale vugs and fractures,and unclear understanding of lost circulation control mechanisms. For the future,smart-responsive materials,nanocomposites,and green and high-efficiency materials represent the core directions for breakthroughs. Furthermore,in-depth studies on multi-field coupled plugging mechanisms and the development of dedicated evaluation standards for ultra-deep drilling conditions are urgently required. These efforts will underpin the safe and efficient development of ultra-deep oil and gas resources.

Reference | Related Articles | Metrics
A Nanogel Viscosifier and Plugging Agent for Deep Complex Formations:Performance Evaluation
LUO Pingya, HE Jianing, DUAN Yongqiang, ZHANG Yong, YOU Ziwei, LIU Pingjiang, CHEN Li, BAI Yang, WANG Ren, BAI Yingrui
Xinjiang Oil & Gas    2026, 22 (1): 1-8.   DOI: 10.12388/j.issn.1673-2677.2026.01.001
Abstract (1479)      PDF (1541KB)(58)       Save
To address the common challenges of rheological deterioration,excessive fluid loss,and wellbore instability for drilling fluids under high temperature,high salinity,and high stress conditions in ultra-deep wells,a cationic nanogel viscosifier and plugging agent,P(AM-DMC),was designed and synthesized from acrylamide (AM) and methacryloxyethyltrimethylammonium chloride (DMC) via inverse suspension polymerization. This material combines the viscosity-enhancing property of flexible polymer chains with the high interfacial activity and size effects of nano-particles. Scanning electron microscopy (SEM) showed the material has an irregular polyhedral morphology and a particle size distribution of 200-500 nm. The performance of the developed material was systematically evaluated in a low solid water based drilling fluid,including rheology,filtration control,and salinity tolerance,while the contact angle and Zeta potential measurements were used to reveal the micro-interfacial properties. The material exhibited high hydrophilicity (a contact angle of 13°) and excellent dispersion stability,facilitated by its strong positive surface charge (Zeta potential of +59.1 mV),which forms the basis of the synergistic viscosity-enhancing and plugging mechanism. Results demonstrated that P(AM-DMC) significantly improves the structural viscosity and shear resistance capacity of the drilling fluid through strong electrostatic adsorption between its cationic chains and clay particles,along with the formation of a three-dimensional network of the materials. Increasing the dosage of P(AM-DMC) markedly enhanced the apparent viscosity and yield point while significantly reducing both API and HTHP fluid loss. The system maintained excellent rheological stability and low fluid loss after aging at 170°C,confirming its outstanding thermal stability. It is indicated that P(AM-DMC) nanogel is a novel additive for high-performance drilling fluids in deep complex formations,offering efficient viscosity enhancement,fine plugging,and superior temperature resistance and thus holding significant engineering value for the safe and efficient drilling of ultra-deep wells.
Reference | Related Articles | Metrics
Research Status and Prospect of Deep and Ultra-deep Drilling Technology
SUN Jinsheng, YANG Jingbin, LV Kaihe, BAI Yingrui, LIU Jingping, HUANG Xianbin
Xinjiang Oil & Gas    2025, 21 (2): 1-14.   DOI: 10.12388/j.issn.1673-2677.2025.02.001
Abstract (1464)      PDF (7802KB)(184)       Save
This paper systematically discusses the research progress of the deep and ultra-deep drilling technology in both China and other countries,analyzes the challenges faced by the deep and ultra-deep drilling technology,and points out the future development direction. With the exploitation of hydrocarbon resources shifting toward deep and ultra-deep formations,drilling technology faces many challenges,such as high temperature and high pressure (HTHP),complex geological structure,and wellbore instability. In recent years,significant progress has been made in the casing program optimization,ultra-deep drilling rig equipment,drilling fluid technology,etc.,but there are still vital problems,such as HTHP tolerance,wellbore instability and severe lost circulation. The future development of the casing program optimization technology is oriented toward intelligence and refinement to improve the risk warning accuracy and the dynamic adjustment ability of the casing program design. The rig equipment and key tools will focus on automation and intelligent upgrading to improve their tolerance of temperature and pressure and reliability. The drilling fluid technology needs to be further studied in terms of water- and oil- based drilling fluid systems tolerant of high temperature and high salinity and lost circulation control and plugging. These technological breakthroughs are expected to provide solid support for the efficient development of deep oil and gas resources.
Reference | Related Articles | Metrics