To address the problems such as wellbore instability,lost circulation of drilling fluids,and insufficient pressure-bearing capacity of existing plugging agents during deep well drilling,due to well-developed micro fractures in strata,a high temperature resistant organic-inorganic composite pressure-bearing plugging agent (P-ANDS) based on modified SiO2 was prepared through the water solution polymerization method. The structure and particle size of P-ANDS were characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,and laser particle size analysis. The results showed that the functional groups of each monomer were successfully grafted onto the surface of modified SiO2,forming a stable organic-inorganic composite structure;the initial thermal decomposition temperature of P-ANDS reached 270°C,indicating good thermal stability;the particle size was mainly distributed between 1-30 μm. Performance tests revealed that P-ANDS has excellent temperature and salinity resistance;the sand bed plugging performance test indicated that P-ANDS has good plugging ability for sand beds composed of particles of different mesh numbers;the pressure-bearing plugging performance test showed that P-ANDS,in contrast to traditional plugging materials,can form a stable pressure-bearing plugging layer in micro fractures. It was concluded that P-ANDS combines the flexible filling ability of organic materials and the rigid supporting ability of inorganic materials to significantly enhance the pressure-bearing plugging capacity of water-based drilling fluids in strata with well-developed micro fractures. It has a promising application prospect in complex deep wells with high temperature,high salinity,and well-developed micro fractures in strata.