Journals
  Publication Years
  Keywords
Search within results Open Search
Please wait a minute...
For Selected: Toggle Thumbnails
Adhesive Anti-Collapse Agent with Temperature-Switchable Behavior for Water-Based Drilling Fluids
Li Xinliang, Tao Jiajun, Deng Zhengjie, Fang Shenwen, Liu Shuai, Geng Yuan, Gao Shifeng
Xinjiang Oil & Gas    2026, 22 (3): 95-103.   DOI: 10.12388/j.issn.1673-2677.2026.03.009
Abstract (733)      PDF (3337KB)(25)       Save

Deep fractured shale formations have well-developed fractures and weak cementation,and are prone to wellbore collapse. Adding anti-collapse agents to drilling fluid is an important way to improve the anti-collapse performance of drilling fluids and stabilize fractured shale. However,the existing anti-collapse agent has insufficient bonding effect at high temperature for borehole wall supporting and thus,difficulties in improving the overall mechanical strength of rock. Using amino acids containing benzene rings and cationic amino acids as raw materials,a high-temperature resistant and strong-bonding anti-collapse agent with temperature switching behavior was synthesized by amidation reaction. This agent delivers an intelligent behavior of “being dispersed and non-adhesive at low temperature,and yet softened and highly cementitious at high temperature”. The laboratory evaluation results show that the anti-collapse agent can increase the shale rolling recovery to 105.6% at 200 °C and the compressive strength of the shale core by 105.82%;in the drilling fluid system,it presents high compatibility and delivers effective sand bed cementation. The microscopic analysis show that the benzene ring and the amino group in the anti-collapse agent molecules present multiple cation-π interactions. The molecular cohesion is dominant at room temperature,while the adhesion to the external interface is weak. In the high temperature environment,the intermolecular cation-π bond is partially dissociated,the adsorption group is released and combined with the shale surface,to fill and cement micro-fractures,construct the tight and hydrophobic protective film,and ultimately effectively stabilize the wellbore. The findings of this research provide references for the design of high-performance water-based drilling fluids for deep fractured formations.

Reference | Related Articles | Metrics

Advances in Study on Temperature-Resistant and Salt-Tolerant Fluid Loss Reducers for Water-Based Drilling Fluids

YUAN Yuehui, QU Yuanzhi, GAO Shifeng, RONG Kesheng, YE Cheng, LIU Kecheng
Xinjiang Oil & Gas    2023, 19 (2): 62-68.   DOI: 10.12388/j.issn.1673-2677.2023.02.008
Abstract (634)      PDF (597KB)(85)       Save

The high-temperature and high-salinity environment in deep well drilling can lead to failure of drilling fluid performance,causing well collapse,lost circulation and other accidents,resulting in reduction of drilling safety and efficiency. As one of the most important additives in the drilling fluid system,the fluid loss reducer can reduce filtration through gel protection,viscosity increase and plugging,minimize damage to the formation and maintain the stability of the wellbore. With the continuous increase of deep and ultra deep well operations in China,more and more high-temperature and high-pressure formations,salt gypsum formations and other harsh formations have been encountered during drilling. The research and development of temperature-resistant and salt-tolerant fluid loss reducers has become the key to addressing the challenges in enhancing the drilling fluid technology for high-temperature and complex wells. Three types of water-based drilling fluid loss reducer were described in this paper,including the fluid loss reducers made of natural polymers and modified materials,synthetic polymers and inorganic/organic composites. It summarizes the recent research results of temperature-resistant and salt-tolerant fluid loss reducers for water-based drilling fluids in terms of raw material composition,synthesis(modification) method and product performance,discusses the future development direction of temperature-resistant and salt-tolerant fluid loss reducers for water-based drilling fluids in China,and provides theoretical guidance for the development and application of temperature-resistant and salt-tolerant fluid loss reducers. 

Reference | Related Articles | Metrics