The Jimsar shale oil reservoir is characterized by ultra-low porosity,ultra-low permeability,low crude oil mobility and high reservoir heterogeneity. Consequently,the development of hydraulically fractured horizontal wells is challenged by reservoir energy depletion and unclear oil-water distribution. To address these issues,a hydraulic fracture propagation model coupled with a reservoir numerical simulation model based on the reservoir petrophysical properties is established to investigate the dynamic evolution of three fields (the pressure field,stress field,and oil saturation field) during hydraulic fracturing and subsequent production. The results indicate that the oil saturation around the fractures decreases rapidly after fracturing fluid injection,and it partially recovers during the early production stage,owing to flowback of fracturing fluids and spontaneous imbibition displacement. During hydraulic fracturing,the pressure and minimum horizontal principal stress around the wellbore both increase significantly,whereas they decrease during the production stage. The pressure decline near the wellbore is larger than that in the far-field region,while the reduction in near-wellbore minimum horizontal principal stress is relatively smaller because of the stress concentration induced by fracture opening. The combined effects of fracture opening and fracturing fluid injection result in the deflection of the in-situ stress orientation around the wellbore. This deflection weakens during the early production period but intensifies after long-term production. The findings of this research provide theoretical guidance for understanding the multi-field coupled evolution around horizontal wells during shale oil development and offer a scientific basis for improving the efficiency of shale oil exploitation.