The deep shale oil reservoir of the Fengcheng Formation in Mabei area features complex geological conditions and its fracturing stimulation is faced with multiple challenges，including high in-situ stress，strong heterogeneity，and densely laminated rock texture. Taking the C2-C4 layers as the research object，this study systematically investigates the mineral composition，laminar texture，rock mechanical properties，and in-situ stress distribution of the reservoir to reveal their control mechanisms on hydraulic fracture initiation and propagation，as well as proppant transport. The results indicate that the reservoir is predominantly composed of high-brittleness minerals，with the combined content of quartz and carbonate rocks exceeding 70%. However，the mineral composition varies dramatically at the centimeter to millimeter scale，forming dense rigid-brittle laminae and lithological interlayers which significantly enhance mechanical anisotropy and interface strength of rocks. The overall in-situ stress is high，with the minimum horizontal principal stress exceeding 80 MPa，while the horizontal stress difference is only 7.0-9.8 MPa. Theoretically，this low stress difference favors the formation of complex fracture networks. Yet，due to the dual effects of high stress magnitudes and laminar interfaces，vertical fracture propagation suffers from step-like restrictions，with fracture heights generally less than 20 m，and thus，it is difficult to achieve thorough stimulation of multiple layers. Natural fractures intersecting hydraulic fractures at small intersection angles may induce branch fractures to increase fracture network complexity；at high intersection angles，they primarily act as conduits for fluid filtration loss. Under the “composite layer effect，” the effectiveness of layer penetration of hydraulic fractures is low，with width reduction at points of fracture deflection exceeding 60%. Proppant can only pass through fractures with widths 2.7 times larger than proppant particle sizes，and accordingly，proppants of conventional sizes are found hard to enter secondary fractures. This study reveals the control mechanism of the “composite layer effect” on hydraulic fracture propagation and proppant transport in the Mabei Fengcheng Formation，provides a theoretical basis for volume fracturing parameter optimization and fracture network regulation in deep complex shale oil reservoirs，and offers direct technical support for the efficient development of shale oil in Mabei area.

Addressing Jimsar shale oil reservoir，this study aims to enhance fracture-controlled reserves by conducting theoretical research and technical practices. Focused on four key aspects—fracture network design，construction，proppant effectiveness，and the enhancement of in-situ oil mobility，three generations of technological advancements have been realized. Fundamental theories regarding the effective propagation of hydraulic fracture in thin interlayers and key technologies such as multi-cluster fracturing within a stage and the use of cost-effective materials have been mastered. An integrated horizontal well volume fracturing technology system centered on fracture-matrix matching，precise stimulation，multi-scale proppant support，and CO₂ prepad injection has been developed. The key technical indicators of fracturing have reached the advanced domestic level，supporting the large-scale and efficient development of Jimsar shale oil. In 2023，the oil production of Jimsar shale oil surpassed 60×10⁴ t，with a consecutive annual production increase of 10×10⁴ t in the block for three years. This achievement has provided robust technical support for the establishment of China's first national continental shale oil demonstration zone by 2025 and serves as a reference for optimizing shale oil development technologies in other regions of China.