Journals
  Publication Years
  Keywords
Search within results Open Search
Please wait a minute...
For Selected: Toggle Thumbnails
Patterns of Influences of Shale Oil Horizontal Well Hydraulic Fracturing and Production on Pressure,Stress and Oil Saturation Fields
Ma Xinfang , Wang Qing , Ma He , Wang Yipeng , Yu Huiyong, , Wang Rui
Xinjiang Oil & Gas    2026, 22 (3): 58-66.   DOI: 10.12388/j.issn.1673-2677.2026.03.006
Abstract (73)      PDF (2872KB)(29)       Save

The Jimsar shale oil reservoir is characterized by ultra-low porosity,ultra-low permeability,low crude oil mobility and high reservoir heterogeneity. Consequently,the development of hydraulically fractured horizontal wells is challenged by reservoir energy depletion and unclear oil-water distribution. To address these issues,a hydraulic fracture propagation model coupled with a reservoir numerical simulation model based on the reservoir petrophysical properties is established to investigate the dynamic evolution of three fields (the pressure field,stress field,and oil saturation field) during hydraulic fracturing and subsequent production. The results indicate that the oil saturation around the fractures decreases rapidly after fracturing fluid injection,and it partially recovers during the early production stage,owing to flowback of fracturing fluids and spontaneous imbibition displacement. During hydraulic fracturing,the pressure and minimum horizontal principal stress around the wellbore both increase significantly,whereas they decrease during the production stage. The pressure decline near the wellbore is larger than that in the far-field region,while the reduction in near-wellbore minimum horizontal principal stress is relatively smaller because of the stress concentration induced by fracture opening. The combined effects of fracture opening and fracturing fluid injection result in the deflection of the in-situ stress orientation around the wellbore. This deflection weakens during the early production period but intensifies after long-term production. The findings of this research provide theoretical guidance for understanding the multi-field coupled evolution around horizontal wells during shale oil development and offer a scientific basis for improving the efficiency of shale oil exploitation.

Reference | Related Articles | Metrics
Development and Performance Evaluation of a High-Efficiency Asphalt Dispersant
ZHENG Cunchuan , WANG Wei , CHEN Shengen , WANG Rui , CHEN Jiangdong
Xinjiang Oil & Gas    2025, 21 (1): 78-86.   DOI: 10.12388/j.issn.1673-2677.2025.01.009
Abstract (239)      PDF (3680KB)(90)       Save

In order to solve the problem of severe blockage caused by the gradual precipitation,aggregation and settlement of asphaltenes with the decreasing temperature during the artificial lifting process in Tahe Oilfield,a high-efficiency asphalt dispersant was developed and evaluated via the steel wire mesh dissolution method. Through the characterization analysis of the wellbore sediments by three-component solvent fractionation,elemental composition determination and scanning electron microscopy (SEM),asphaltenes were determined to be the main component of Tahe wellbore sediments. According to the principle of similar mutual solubility ,a dispersant LYH-1 (aromatic solvent LY + 1.0% n-pentanol + 1.0% nonylphenol + 0.2% petroleum sulfonate) that could efficiently dissolve asphaltenes was developed. The asphaltene sediments were soaked in the asphalt dispersant LYH-1 in a water bath at 50°C for 4 h,and the solubility of 1 g of asphaltene sediments in 5 g of asphalt dispersant LYH-1 was as high as 97%,and the sediments did not aggregate after long-term standing,suggesting excellent stability and expanded applicability. The investigation of the working mechanism of the high-efficiency asphalt dispersant LYH-1 demonstrates that the dispersant forms a stable system with asphaltene sediments,mainly through hydrogen bonding and π-π interaction,which reduces the particle sizes of asphaltene aggregates to allow them to be stably suspended in solutions,and hinders the further flocculation and deposition of asphaltenes. The results show that LYH-1,as a novel high-performance asphalt dispersant,can effectively prevent the blockage of oil wells and surface pipelines while reducing production costs,so as to achieve the goal of production growth and improve the development efficiency of heavy oil reservoirs.

Reference | Related Articles | Metrics
A Method for Calculating Collapse Pressure of High-Strength-Steel Thick-Wall Pipelines with Double Defects under Axial Load
FAN Jianchun, JIANG Zhiming, CHEN Yanfei, WANG Rui, LIU Dandan, SHENG Yu,
Xinjiang Oil & Gas    2024, 20 (2): 71-.   DOI: 10.12388/j.issn.1673-2677.2024.02.009
Abstract (123)      PDF (1789KB)(55)       Save

During the production and laying of submarine oil and gas pipelines,the ovality defects of pipelines may occur,due to the influences of the UOE pipe making process and tensioner. Meanwhile,complex deep-sea service conditions tend to cause local corrosion defects in submarine pipelines. An ABAQUS finite element model is established to address the buckling and collapse of thick-wall high-strength-steel pipe with double defects under complex loading of coexisting external pressure and axial force,considering the geometric and material nonlinearity of the pipe. Based on the analysis of more than 2 400 sets of finite element simulation data incorporating different pipe materials,geometric parameters and defect geometric parameters,the variation law of collapse pressure of high-strength-steel thick-wall pipes with double defects is summarized,and the calculation method of collapse pressure of high-strength-steel thick-wall pipes with double defects is proposed. This method provides a theoretical basis for predicting the buckling load of high-strength-steel thick-wall pipeline in practical engineering projects,so as to ensure the safety of offshore oil and gas transportation.

Reference | Related Articles | Metrics
CO2 Flooding Connectivity Characteristics of the Strong Water-Sensitive Conglomerate Reservoir in Xinjiang Oilfield
CHEN Shengen, XU Jinshan, ZHANG Xin, WANG Rui, ZHANG Liwei, LI Haifu
Xinjiang Oil & Gas    2024, 20 (1): 44-51.   DOI: 10.12388/j.issn.1673-2677.2024.01.006
Abstract (223)      PDF (2075KB)(105)       Save

Clarifying the connectivity characteristics between injection and production wells in CO2 flooding reservoirs can provide essential support for the subsequent implementation of CO2 flooding technology to improve sweep efficiency. With a strong water-sensitive conglomerate reservoir in Xinjiang Oilfield as the research object,this paper specifies the key parameters for determination of injection and production connectivity through the analysis of injection and production data. It designs the evaluation coefficient C after presetting the proportion of key parameters,and confirms the connectivity between injection and production wells under different ranges of C value,thus establishing a connectivity evaluation method for the strong water-sensitive conglomerate reservoir. This method can be used to judge weak,medium,or strong connectivity between injection and production wells in this area and analyze the main controlling factors of different connectivity characteristics to form targeted treatment measures. The study shows that the key parameters for determination of injection and production connectivity are oil production rate,tubing pressure,and the gas component of production wells. When the C value is greater than 8,the injection and production wells have strong connectivity;between 3 and 8,the injection and production wells have medium connectivity;and when less than 3,the injection and production wells have weak connectivity. According to the statistical injection and production data of the whole area and the C value,the connectivity between injection and production wells in the block presents two apparent characteristics. First,the connectivity between injection and production wells has directionality. The medium and strong connectivity is mainly northwest,but the local connectivity has specific differences,primarily affected by the structure and early water flooding. Second,the connectivity has regional characteristics and is better in the northeast region of the block center. Among the 22 wells in the area,14 wells show strong connectivity,accounting for 63.6%,mainly affected by the difference in formation permeability and the amount of carbon injection. According to the results of injection and production connectivity,it is suggested to implement classified management of the various connected wells in the area,huff and puff for wells with weak connectivity in the marginal area,small-scale fracturing for wells with weak connectivity in the core area,and channeling sealing and profile control for wells with strong connectivity. This study can provide a reference for the efficient development of strong water-sensitive conglomerate reservoirs by CO2 flooding after water injection.

Reference | Related Articles | Metrics

Experimental Study on Film Permeability and Stability of Nanofiber Enhanced Foam

CHEN Shengen, WANG Rui, YI Yonggang, ZHANG Xin, XU Jinshan, SHANG Jin
Xinjiang Oil & Gas    2023, 19 (1): 81-89.   DOI: 10.12388/j.issn.1673-2677.2023.01.012
Abstract (153)      PDF (10906KB)(62)       Save

Foam can effectively address the fluid channeling problem caused by gas-liquid mobility difference and fractures in gas flooding in tight reservoirs,and increase gas flooding sweep efficiency. However,the foam is a thermodynamically sub-stable system,and its long-term stability is limited. Therefore,based on the nanofiber (NCF) enhanced foam system,the influence of NCF on gas permeability through film in N2 foam and CO2 foam was analyzed,and the micromorphological changes of the two kinds of NCF enhanced foam system under different oil content were observed. Furthermore,the paper also explored how the nanofiber improves the foam stability and the relationship between the foam system stability and the permeability of the foam film. It was found the nanofiber can reduce the permeability of the film. The permeability of the N2 and CO2 bubbles was reduced by about 89% and 65% respectively by 0.1 wt % NCF,while the defoaming time was increased by 2.7 times and 11.3 times respectively. The results showed that NCF can inhibit bubble instability by reducing the permeability of the film,and the thickness of the NCF-enhanced N2 foam is higher than those of the CO2 foam,while the diameter of the NCF-enhanced N2 foam is smaller. The instability trend of NCF enhanced CO2 foam is stronger under different oil content,which shows that NCF can enhance the stability of N2 foam better. The nanofiber can be used to improve the foam performance,optimize foam system,thus enhancing foam stability. Research in this field has proved to be helpful for improving the recovery factor of gas flooding reservoirs.

Reference | Related Articles | Metrics