Deep and ultra-deep oil and gas reservoirs have stricter requirements on the thermal resistance,salt tolerance,shear resistance,proppant-carrying capacity and post-fracturing cleanup of fracturing fluids. Given the cross uses of the two concepts “high-temperature” and “ultra-high-temperature”,this research discusses fracturing environments above 150 ℃,with particular attention to the premature decomposition,shortened effective reaction time and insufficient degradation in deep fractures of breakers at 180-200 ℃ and higher temperature. The targets and technical difficulties of breakers are summarized for guar and modified guar fluids,polyacrylamide-based fluids,viscoelastic surfactant fluids,slick-water and seawater-based systems,and the application boundaries of oxidative,enzymatic,acid/thermal,encapsulated-release and composite breakers are compared. Controllable breaking should not be limited to rapid viscosity reduction after fracturing,but should coordinate viscosity retention during pumping,effective breaker release at target locations,sufficient polymer degradation and low-damage flowback after breaking. Subsequent assessment can identify the correlation among high-temperature high-pressure dynamic release,retention morphology and fracture conductivity retention to provide references for design of low-damage fracturing fluid systems for deep and ultra-deep oil and gas reservoirs.