Xinjiang Oil & Gas ›› 2026, Vol. 22 ›› Issue (3): 37-49.DOI: 10.12388/j.issn.1673-2677.2026.03.004

• OIL AND GAS DEVELOPMENT • Previous Articles     Next Articles

Research Progress and Challenges of Temperature Control Technologies for High-Temperature Drilling Fluids in Ultra-Deep Wellbores

Zhong Xiuping, , Guo Wei, , Liu Zhao, , Wang Xiaochu, , Jia Rui   

  1. 1.State Key Laboratory of Deep Earth Exploration and Imaging,Changchun 130026,Jilin,China;

    2.College of Construction Engineering,Jilin University,Changchun 130026,Jilin,China;

    3.Key Lab of Ministry of Natural Resources for Drilling and Exploitation Technology in Complex Conditions,Changchun 130026,Jilin,China

  • Received:2026-08-05 Revised:2026-08-11 Accepted:2026-09-01 Online:2026-09-15 Published:2026-09-15

超深钻探井筒高温钻井液控温技术研究进展与挑战

钟秀平, 郭威, 刘召, 王晓初, 贾瑞   

  1. 1.深部探测与成像全国重点实验室,吉林长春  130026;

    2.吉林大学建设工程学院,吉林长春  130026;

    3.自然资源部复杂条件钻采技术重点实验室,吉林长春  130026

  • 作者简介:贾瑞(1985—),2013年毕业于吉林大学地质工程专业,博士,教授,目前从事非常规地质能源钻采理论与关键技术研究。(E-mail)jiarui@jlu.edu.cn
  • 基金资助:

    深地国家科技重大专项课题“高温泥浆智能调控系统”(2024ZD1000803)

Abstract:

Drilling fluid performance degradation and downhole tool failure,induced by high formation temperature,have become critical challenges restraining safe and efficient implementation of ultra-deep drilling. Wellbore drilling fluid temperature control is an essential technology to deal with high formation temperature. This research systematically reviews the research progress of wellbore drilling fluid temperature control technologies for ultra-deep drilling worldwide. First,the evolution of wellbore heat transfer models from steady-state models and transient models to multiphysics coupled models is analyzed,and the development of numerical simulation methods and intelligent prediction technologies is summarized. Subsequently,the development status of active cooling equipment for drilling fluids,structures and materials of insulated drill pipes,and continuous circulation technologies is reviewed,with emphasis on their temperature control mechanisms and application performance. Finally,the challenges to existing temperature control technologies in terms of adaptability to complex ultra-deep well conditions,equipment reliability,and system-level coordinated control are discussed,and future development directions of wellbore drilling fluid temperature control technologies for ultra-deep drilling are proposed.

Key words: ultra-deep drilling, wellbore temperature control, wellbore temperature simulation, insulated drill pipe, continuous circu

摘要:

地层高温引起的钻井液性能失效和井下工具损坏,已成为制约超深钻探安全高效实施的关键挑战,井筒钻井液控温是应对地层高温的重要技术。鉴于此,系统综述了国内外超深钻探井筒钻井液控温技术研究进展。首先,分析了井筒传热模型由稳态模型、瞬态模型向多物理场耦合模型的发展过程,总结了数值模拟方法及智能预测技术的应用进展;其次,梳理了钻井液主动降温装备、隔热钻杆结构与材料以及连续循环技术的发展现状,分析了不同技术的控温作用机制及应用效果;最后,剖析了现有控温技术在复杂超深井环境适应性、装备可靠性及系统协同调控方面面临的挑战,并对超深钻探井筒钻井液控温技术的后续发展方向进行了展望。

关键词:

超深钻探, 井筒控温, 井筒温度模拟, 隔热钻杆, 连续循环

CLC Number: