Journals
  Publication Years
  Keywords
Search within results Open Search
Please wait a minute...
For Selected: Toggle Thumbnails
Research Progress and Prospect of Lost Circulation Materials for Ultra-Deep Drilling
Sun Jinsheng, Ren Zhangkun, Bai Yingrui, Yang Jingbin, Lyu Kaihe, Jin Jiafeng
Xinjiang Oil & Gas    2026, 22 (3): 1-16.   DOI: 10.12388/j.issn.1673-2677.2026.03.001
Abstract (1400)      PDF (13154KB)(33)       Save

In view of technical challenges of lost circulation control during ultra-deep drilling,this research provides a systematic review of lost circulation materials (LCMs) for ultra-deep drilling,covering both international and China’s research progress. It summarizes the advantages and limitations of various types of LCMs,analyzes the core technical challenges under extreme wellbore environments,and outlines future development directions. As oil and gas exploration in China progressively advances toward ultra-deep formations,drilling operations are commonly confronted with complex conditions including high temperature and high pressure,multi-scale fracture-vug development,and dynamic in-situ stress disturbances. Frequent lost circulation,difficulty in thief zone plugging,and short sealing duration have severely constrained the efficient development of ultra-deep hydrocarbon resources. At present,a multi-category technological framework for ultra-deep LCMs has been established,encompassing rigid bridging materials,consolidating materials,micro/nano-plugging agents,smart-responsive materials,and multifunctional composite systems,with notable progress achieved in lost circulation control. However,existing technologies still face critical challenges,such as insufficient long-term stability at ultra-high temperature (>220 ℃),inadequate sealing strength for large-scale vugs and fractures,and unclear understanding of lost circulation control mechanisms. For the future,smart-responsive materials,nanocomposites,and green and high-efficiency materials represent the core directions for breakthroughs. Furthermore,in-depth studies on multi-field coupled plugging mechanisms and the development of dedicated evaluation standards for ultra-deep drilling conditions are urgently required. These efforts will underpin the safe and efficient development of ultra-deep oil and gas resources.

Reference | Related Articles | Metrics
Development and Evaluation of Block Silicone Oil Anti-Water Blocking Agent
JIN Jiafeng, DENG Yan, HUANG Xianbin, WANG Jintang, LIU Kesong
Xinjiang Oil & Gas    2023, 19 (3): 38-41.   DOI: 10.12388/j.issn.1673-2677.2023.03.006
Abstract (179)      PDF (597KB)(81)       Save

To prevent the water block damage induced by any extraneous fluid's invasion during drilling and completion operations in low-permeability gas reservoirs,a high-performance anti-water blocking agent(FWB),which is composed of hydrogen-rich block silicone oil and some additives such as organosilicon surfactant and deformer,was developed for low-permeability gas reservoirs. The infrared spectroscopy was used to characterize the molecular structure of the block silicone oil,and a series of tests,which include surface tension test,contact angle test,core imbibition test,permeability recovery ratio test,and drilling fluid compatibility test,were conducted to comprehensively evaluate the performance of this anti-water blocking agent. The test results show that,at the mass concentration of 1%,it can dramatically reduce the surface tension of the aqueous phase to 22.28 mN/m,increase the contact angle of the aqueous phase from 29° to 120°,decrease the core imbibition amount by 69.2%,and improve the permeability recovery ratio to 89.3%,and that it has good compatibility with drilling fluids. This anti-water blocking agent can significantly reduce the water block damage during drilling and completion operations and provide effective protection for low-permeability oil and gas reservoirs. 

Reference | Related Articles | Metrics